Residential
Hyperion HomeCore™ Residential Battery
$8,40010.5 kWh system
Compact home battery with app monitoring and seamless backup power.
Commercial
Hyperion GridBridge™ Hybrid Inverter
A grid-forming hybrid inverter that bridges solar, storage and critical loads without dropping the bus.
Key benefits
One inverter for solar, storage and backup
- 8 – 60 kW models (30 kW as quoted)
- 98.4% peak efficiency, grid-forming
- 4 MPPT trackers, 8 string inputs
- Part number
- HYP-GB-30K
- Lead time
- 4–6 weeks
- Warranty
- 10 years
- Minimum order
- 1 unit
Overview
What this product does
GridBridge™ replaces the separate solar inverter, battery inverter and backup transfer switch with a single hybrid unit. Four independent MPPT trackers handle strings on different roof planes, while the battery port charges and discharges the same DC bus — so solar can power loads and charge storage at the same time.
It is genuinely grid-forming: in an outage it establishes the voltage and frequency reference itself and picks up critical loads in under 10 ms. Compliant with IEEE 1547-2018, UL 1741 SA/SB and Rule 21, it is approved for interconnection in every market we serve.
Specifications
Technical parameters
Published figures for the standard configuration. Additional sizes, capacities and options are quoted on request.
Power
| Rated output | 30 kW (8 – 60 kW family) |
|---|---|
| Topology | 3-phase hybrid, transformerless |
| Max efficiency | 98.4% |
| CEC efficiency | 97.6% |
| Output voltage | 400 / 480 V, 50 / 60 Hz |
| Power factor | 0.8 leading – 0.8 lagging |
Solar input
| MPPT channels | 4 independent |
|---|---|
| Strings per MPPT | 2 (8 total) |
| MPPT voltage range | 180 – 1,000 V |
| Max DC voltage | 1,100 V |
| Max DC current | 40 A per MPPT |
| Start-up voltage | 200 V |
Battery & backup
| Battery interface | CAN / RS485, 400 – 800 V DC |
|---|---|
| Battery power | Up to 30 kW charge / discharge |
| Grid-forming | Yes |
| Transfer time | < 10 ms |
| THD | < 3% at rated output |
| Parallel operation | Up to 8 units |
Physical & compliance
| Enclosure rating | IP66 / NEMA 4X |
|---|---|
| Cooling | Variable-speed forced air |
| Ambient temperature | −25 °C to +60 °C |
| Communications | CAN, RS485, Ethernet, Wi-Fi |
| Compliance | UL 1741 SA/SB, IEEE 1547-2018, Rule 21 |
Figures are provided for planning purposes and are confirmed in the submittal pack issued with your quotation. Certified drawings and test reports are available for every product line.
Features
Built around these advantages
Grid-forming
Creates its own grid reference so critical loads never see an interruption.
Hybrid by design
Solar, storage and loads share one DC bus — fewer conversions, higher efficiency.
Flexible strings
Four MPPT trackers handle complex roofs without external combiners.
Outdoor rated
An IP66 / NEMA 4X enclosure mounts outside, with no equipment room needed.
Typical applications
- Commercial solar + storage
- Critical-load backup
- Microgrid controllers
- Agricultural & irrigation
- Telecom & remote sites
- Peak shaving
What’s included
- GridBridge™ inverter in the specified rating
- Wall or pole mounting bracket
- Commissioning and grid-setting service
- Monitoring gateway and portal access
- 10-year standard warranty
Related products
Complete the specification
Commercial
Hyperion CellGuard™ BMS
$620per string
Battery management platform with active balancing and open protocols.
Portable
Hyperion RoverPack™ Portable Power Station
$1,1502.0 kWh
Rugged portable storage for field, event and emergency power.
Need pricing for this configuration?
Send us your requirements and we will return a costed proposal with options and lead time.